ផ្លាយ អាស់៖ ភាពខុសគ្នារវាងកំណែនានា

ពីវិគីភីឌា
ខ្លឹមសារដែលបានលុបចោល ខ្លឹមសារដែលបានសរសេរបន្ថែម
បន្ទាត់ទី១១៩៖ បន្ទាត់ទី១១៩៖


===សំភារៈ​ចាក់​បំពេញ​ហាប់​ខ្លួន​ឯង===
===សំភារៈ​ចាក់​បំពេញ​ហាប់​ខ្លួន​ឯង===
Fly ash is also used as a component in the production of [[flowable fill]] (also called controlled low strength material, or CLSM), which is used as self-leveling, self-compacting backfill material in lieu of compacted earth or granular fill. The strength of flowable fill mixes can range from 50 to 1,200 [[pound-force per square inch|lbf/in²]] (0.3 to 8.3 [[megapascal|MPa]]), depending on the design requirements of the project in question. Flowable fill includes mixtures of Portland cement and filler material, and can contain mineral admixtures. Fly ash can replace either the Portland cement or fine aggregate (in most cases, river sand) as a filler material. High fly ash content mixes contain nearly all fly ash, with a small percentage of Portland cement and enough water to make the mix flowable. Low fly ash content mixes contain a high percentage of filler material, and a low percentage of fly ash, Portland cement, and water. Class F fly ash is best suited for high fly ash content mixes, whereas Class C fly ash is almost always used in low fly ash content mixes.<ref name="faffhe" /><ref>{{Cite journal
| first = K. W. | last = Hennis | first2 = C. W. | last2 = Frishette
| contribution = A New Era in Control Density Fill
| title = Proceedings of the Tenth International Ash Utilization Symposium
| year = 1993
| postscript = <!--None-->
}}</ref>

===បេតុង​អាស្វាល់===
===បេតុង​អាស្វាល់===
===ធរណី​ប៉ូលីមែរ===
===ធរណី​ប៉ូលីមែរ===

កំណែនៅ ម៉ោង១៣:១៤ ថ្ងៃសុក្រ ទី២៦ ខែសីហា ឆ្នាំ២០១១

ផ្លាយអាស់​ជា​កាកសំនល់​សល់​ពី​ចំហេះ​ធ្យូង​ថ្ម។ ផ្លាយអាស់​ជា​ទូទៅ​ ត្រូវ​គេ​ប្រមូល​មក​ពី​បំពង់​ផ្សែង​របស់​រោងចក្រថាមពល​ប្រើ​ធ្យូង​ថ្ម ហើយ​វា​ជា​ផេះ​មួយ​ប្រភេទ ដែល​មាន​ឈ្មោះ​ថា ផេះធ្យូង​ (coal ash) ដែល​ផេះ​មួយ​ប្រភេទ​ទៀត​ហៅ​ថា ផេះ​បាត (bottom ash) ដែល​គេ​យក​ចេញ​ពី​បាត​របស់​ឡ​ដុត​ធ្យូង។ ដោយ​អាស្រ័យ​លើ​ប្រភព​និង​លក្ខណៈ​របស់​ធ្យូង​ថ្ម​ដែល​គេ​ដុត នោះ​សារធាតុ​ផ្សំ​របស់​ផ្លាយ​អាស់ ប្រែប្រួល​ខុស​គ្នា​គួរ​អោយ​កត់​សំគាល់ ប៉ុន្តែ​ផ្លាយ​អាស់​គ្រប់​ប្រភេទ​ទាំង​អស់ សុទ្ធ​តែ​មានក្នុង​​បរិមាណយ៉ាង​ច្រើន​ នៃ ស៊ីលីកូនឌីអុកស៊ីត (SiO2)(ទាំង​ជាអសណ្ឋាន​និងជា​​គ្រីស្តាលីន)​និង​កាល់ស្យូម​អុកស៊ីត (CaO)។

កាល​ពី​មុន​ផ្លាយ​អាស់ ត្រូវ​បាន​គេបង្ហុយ​​ចោលទៅ​​ក្នុង​បរិយាកាស ប៉ុន្តែ​អីលូវ​នេះ​ច្បាប់​ស្តី​ពី​ការ​​បំពុលបរិស្ថាន​​របស់​ឧបករណ៍ប្រើ​ប្រាស់ បាន​ដាក់​កំហិត​អោយ​ឃាត់​ទុក​ផ្លាយអាស់​មិន​អោយ​ហុយ​ចូល​ក្នុង​បរិយាកាស​ដូច​មុន​ទៀត​ទេ។ នៅ​សហរដ្ឋ​អាមេរិច ផ្លាយអាស់​ត្រូវ​បាន​គេ​ស្តុក​ទុក​នៅ រោងចក្រ​ថាមពល​ធ្យូងថ្ម។ វា​ត្រូវ​បាន​គេ​យក​មក​ប្រើ​ជា​ទូទៅ​សំរាប់​បន្ថែម​ទៅ​លើ​ស៊ីម៉ង់ត៍​ផតលែន នៅ​ក្នុង​ផលិតកម្ម​បេតុង ដែល​វា​បាន​ផ្តល់​ទាំង​គុណ​ប្រយោជន៍​ផ្នែក​បច្ចេកទេស​និង​សេដ្ឋកិច្ច។ គេ​កំពុង​តែប្រើ​វា​ច្រើន​ឡើងៗនៅ​ក្នុង​ការ​សំយោគ​នៃ​ធរណីប៉ូលីមែរ និង​សេអូលីត​ផង​ដែរ។


ធាតុ​ផ្សំ​គីមី​និង​ចំនាត់​ថ្នាក់

សារធាតុ​ផ្សំ ប៊ីទូម អនុប៊ីទូម លីញីត
SiO2 (%) 20-60 40-60 15-45
Al2O3 (%) 5-35 20-30 20-25
Fe2O3 (%) 10-40 4-10 4-15
CaO (%) 1-12 5-30 15-40
LOI (%) 0-15 0-3 0-5

ផ្លាយ​អាស់​ឡើង​រឹង​ពេល​ដាក់​ក្នុង​ចំហាយ​ឧស្ម័ន ហើយ​ប្រមូល​ដោយ​អង្គ​បង្កក​អេឡិចត្រូ​ស្តាទិច រឺ​ក៏​ថង់តំរង។ ដោយ​សារ​តែ​ភាគល្អិត​កក​ចូល​គ្នា​ពេល​ដាក់​ក្នុង​ចំហាយ​ឧស្ម័ន ភាគល្អិត​ផ្លាយអាស់​ជា​ទូទៅ​មាន​រាង​ស្វ៊ែរ ហើយ​មាន​ទំហំ ចាប់​ពី​ 0.5 µm ទៅ 100 µm។ ពួក​វា​មួយ​ផ្នែក​ធំផ្សំ​ពី​​ ស៊ីលីកូន​ឌីអុកស៊ីត ដែល​មាន​ទ្រង់ទ្រាយ​ពីរ​យ៉ាង: មួយ អសណ្ឋាន ដែល​មាន​រាង​មូល​រលោង និងមួយ​ទៀត គ្រីស្តាលីន ដែល​មាន​រាង​ជ្រុង ស្រួច កញ្ឆិញ​កញ្ឆុញ; អាលុយមីញ៉ូមអុកស៊ីត​ (Al2O3) និង ដែក​អុកស៊ីត(Fe2O3)។ ផ្លាយអាស់​ ជា​ទូទៅ​អេតេរ៉ូសែន​ខ្លាំង​ ប្រកប​ដោយ​ភាគល្អិតថ្លាចំរុះ​គ្នា ដែល​មាន​ទ្រង់ទ្រាយ​គ្រីស្តាល់​ដែល​គេ​អាច​កត់​សំគាល់​បាន ដូច​ជា​ក្វាត មុយលីត និង ដែក​អុកស៊ីត​ផ្សេង​ទៀត។

មាន​ផ្លាយអាស់​ពីរ​ថ្នាក់ ដែល​កំនត់ដោយ ASTM C618: ផ្លាយអាស់​ថ្នាក់ F និង​ផ្លាយ​អាស់​ថ្នាក់​ C។ ចំនុច​ខុស​គ្នា​សំខាន់​រវាង​ថ្នាក់​ទាំង​ពីរ​នេះ គឺ​បរិមាណ​កាល់ស្យូម, ស៊ីលីកា, អាលុយមីញ៉ូម និង​បរិមាណ​ដែក​ នៅ​ក្នុង​ផេះ។ លក្ខណៈ​គីមី​របស់​ផ្លាយអាស់ អាស្រ័យ​ជា​ខ្លាំង​នឹង​ធាតុគីមី​ផ្សំ​របស់​ធ្យូង​ថ្ម​ដែល​គេ​យក​មក​ដុត (មានន័យ​ថា anthracite, ប៊ីទូម, និង​ លីញីត).[១]

មិន​មែន​ផ្លាយអាស់​ទាំងអស់ សុទ្ធតែ​គោរពតាម​ស្តង់ដា ASTM C618 នោះ​ទេ, ទៅ​តាម​ប្រភេទ​នៃ​ការ​អនុវត្ត​ជាក់​ស្តែង ពេល​ខ្លះ​វា​មិន​ចាំបាច់​ទេ។ ផេះ​ប្រើ​​ជំនួស​អោយ​ស៊ីម៉ង់ត៍ ត្រូវ​គោរព​តាម​ស្តង់ដា​សាងសង់​ជា​ដាច់ខាត ប៉ុន្តែ​មិន​មាន​ស្តង់ដា​បរិស្ថាន​ណា​មួយ​ ត្រូវ​បាន​គេ​បង្កើត​ឡើង​នៅ​អាមេរិច​ទេ។ 75% នៃ​ផេះ​ត្រូវ​មាន ភាពល្អិត ស្មើ​ 45 µm រឺ​តូច​ជាង, ហើយ​ មាន​បរិមាណ​កាបូន ដែល​វាស់​ដោយ​ loss on ignition (LOI), មាន​តំលៃ​តិច​ជាង​ 4%។ នៅ​សហរដ្ឋ​អាមេរិច LOI ត្រូវ​តិច​ជាង 6%។ របាយ​ទំហំ​ភាគល្អិត​នៃ​ផ្លាយអាស់​មិន​ទាន់​កែច្នៃ ប្រែ​ប្រួល​មិន​ទៀងទាត់ អាស្រ័យ​តាម​ម៉ាស៊ីន​កិនធ្យូងថ្ម និង ម៉ាស៊ីន​កំដៅ។ ដូច្នេះ​ហើយ​ផ្លាយអាស់​ដែល​ត្រូវ​យក​មក​ប្រើ​ក្នុង​បេតុង ចាំបាច់​ត្រូវ​តែ​កែច្នៃ ដោយ​ប្រើ​ឧបករណ៍​រែង ដូច​ជា​ mechanical air classifiers។

ផ្លាយ​អាស់​ថ្នាក់​F

ចំហេះ នៃ​អង់ត្រាស៊ីត និង​ធ្យូង​ប៊ីទូម​រឹង ហើយ​ចាស់ ជា​ធម្មតា​ផលិត​បាន​ផ្លាយអាស់​ថ្នាក់​F។ ផ្លាយអាស់​នេះ មាន​លក្ខណៈ​ប៉ូស្សូលាន ហើយ​មាន​បរិមាណ​កំបោរ CaO តិច​ជាង​១០%។ ដោយ​វា​មាន​លក្ខណៈ​ប៉ូស្សូឡានិច គ្រាប់​ស៊ីលីកា​និង​អាលុយមីណា ថ្លាៗ ត្រូវ​ការ ភ្នាក់ងារ​បន្ស៊ី ដូច​ជា​ស៊ីម៉ង់ត៍​ផតលែន កាល់ស្យូម​អុកស៊ីត(កំបោរ) រឺ​ក៏​ទឹក​កំបោរ (កាល់ស្យូម​អ៊ីដ្រុកស៊ីត) ដោយ​មាន​វត្តមាន​ទឹក ដើម្បី​បង្កើត​ប្រតិកម្ម និង​បង្កើត​បាន​ជា​សារធាតុ​ស៊ីម៉ង់ត៍។ តាម​បែប​ម្យ៉ាង​ទៀត ការ​បន្ថែម​កាតាលីករ​គីមី​ដូច​ជា សូដ្យូម​ស៊ីលីកាត (រឺ​ហៅ​ម្យ៉ាង​ទៀត​ថា water glass) ទៅ​ក្នុង​ផ្លាយអាស់​ថ្នាក់ F អាច​បង្កើត​បាន​ជា​ធរណី​ប៉ូលីមែរ

ផ្លាយ​អាស់​ថ្នាក់​C

ផ្លាយអាស់​ផលិត​ចេញ​ពី​ចំហេះ​លីញីត​ខ្ចី រឺ ធ្យូងថ្ម​អនុប៊ីទូម លើស​ពី​មាន​លក្ខណៈ​ប៉ូស្សូឡានិច​ វា​ក៏​មាន​លក្ខណៈ​ស៊ីម៉ង់ត៍​ខ្លួន​វា​ខ្លះ​ដែរ។ នៅ​ពេល​ដែល​ប៉ះ​នឹង​ទឹក ផ្លាយអាស់​ថ្នាក់​C នឹង​កក​រឹង ហើយ​មាន​រេស៊ីស្តង់​កើន​ឡើងៗ​។ ផ្លាយអាស់​ថ្នាក់​C ជា​ទូទៅ​មាន​កំបោរ​CaO ច្រើន​ជាង ២០%។ ខុស​ពី​ថ្នាក់​F ផ្លាយអាស់​ថ្នាក់​C ដែល​មាន​លក្ខណៈ​ស៊ីម៉ង់ត៍​ដោយ​ខ្លួន​ឯង មិន​ត្រូវ​ការ​កាតាលីករ។ បរិមាណ អាល់កាលី និង​ស៊ុលផាត (SO4) ជា​ទូទៅ​មាន​ច្រើន​ ចំពោះ​ផ្លាយ​អាស់​ថ្នាក់​C។

កាក​សំនល់​និង​ប្រភព​ទី​ផ្សារ

កាល​ពី​មុន ផ្លាយអាស់ ផលិត​មក​ពី​ចំហេះ​ធ្យូង​ថ្ម ត្រូវ​បាន​គេ​បង្ហុយ​តាម​ផ្សែង​ចូល​ទៅ​ក្នុង​បរិយាកាស។ រឿង​នេះ​បង្កើត​បាន​ជា​ការ​ព្រួយ​បារម្ភ​ដល់​សុខភាព​សាធារណៈ ដែល​ជំរុញ​អោយ​គេ​បង្កើត​ច្បាប់​រឹត​បន្តឹង​ការ​បង្ហុយ​ផ្លាយអាស់​​អោយ​នៅ​ទាប​ជាង​១%​​នៃ​បរិមាណ​ផេះ​ដែល​កើត​ចេញមក។ ក្នុង​ពិភពលោក​ទាំង​មូល ​ផ្លាយអាស់​ច្រើន​ជាង​៦៥%​ ដែល​កើត​​ចេញ​ពី​រោងចក្រ​ថាមពល​ធ្យូង​ថ្ម ត្រូវ​បាន​គេ​យក​ទៅ​ចាក់​គរ​ចោល។ គ្រាន់​តែ​នៅ​ឥណ្ឌា​តែ​មួយ​ប៉ុណ្ណោះ ផ្លាយអាស់​បាន​ចាក់​ស្រោច​លើ​ដី​ដែល​មាន​ក្រលាផ្ទៃ ១៦០គម

កាកសំនល់​ផ្លាយ​អាស់​ បានបង្ក​ជា​ការ​ព្រួយ​បារម្ភ​កាន់​តែ​ច្រើន​​ឡើងៗ ក្នុង​ពេល​ថ្មីៗ​នេះ​ដោយ​សារ​តែ​តំលៃ​នៃ​ការ​ចាក់​គរ​លើ​ដី​ឡើង​ថ្លៃ និង​សារសំខាន់​នៃ​ការ​អភិវឌ្ឍ​យូរ​អង្វែង។​ ចាប់​ពី​ឆ្នាំ​២០០៥​មក រោងចក្រ​ថាមពល​ធ្យូងថ្ម​របស់​សហរដ្ឋ​អាមេរិច ត្រូវ​បាន​គេ​រាយការណ៍​ថា បាន​បញ្ចេញ​ផ្លាយអាស់​៧១,១​លាន​តោន ដែល​ក្នុង​នោះ ២៩,១លាន​តោន ត្រូវ​បាន​គេ​យក​ទៅ​ប្រើ​នៅ​ក្នុង​វិស័យ​ផ្សេងៗ។[២] ដូច្នេះ​បើ​សិន​ជា​ផ្លាយអាស់​​ទំងន់​៤២លាន​តោន ត្រូវ​យក​ទៅកែ​ច្នៃ​សំរាប់​ប្រើ នោះ​វា​បាន​ជួយ​កាត់​បន្ថយ​តំរូវ​ការ​ផ្ទៃ​ដី​ចាក់​បំពេញ​ទំហំ ៣៣.៩០០.០០០ម[២][៣] គុណសម្បត្តិ​ផ្សេង​ទៀត​ទៅ​លើ​បរិស្ថាន​ នៃ​ការ​យក​ផ្លាយ​អាស់​ទៅ​ប្រើ គឺ​វា​ជួយ​កាត់​បន្ថយ​ការ​ប្រើ​ប្រាស់​រូបធាតុ​ដើម​ ដែល​គេ​ត្រូវ​គាស់​កាយ​ចេញ​ពី​ធម្មជាតិ និង យក​ទៅ​ប្រើ​ជំនួស​អោយ​សំភារៈ​ផ្សេង​ទៀត​ដែល​ត្រូវ​ការ​ថាមពល​ច្រើន​ក្នុងការ​បង្កើត​ដូច​ជា​ស៊ីម៉ង់ត៍​ផតលែន ជា​ដើម។​

បំរើ​បំរាស់​ផ្លាស​អាស់

ការ​យក​ផ្លាយអាស់​ទៅ​ប្រើ​ឡើង​វិញ ជា​សំភារៈ​វិស្វកម្ម កើត​ចេញ​មក​អំពី​លក្ខណៈ​ប៉ូស្សូឡានិច​របស់​វា មាន​រាង​ស្វ៊ែរ និង​ឯកសណ្ឋាន​គួរ​សម។ ការ​យក​ផ្លាយអាស់​ទៅ​ប្រើ​ឡើងវិញ តាម​លំដាប់​ញឹកញាប់​ខ្លាំង​ទៅ​តិច មាន​ដូច​ជា៖

ស៊ីម៉ង់ត៍​ផតលែន

Owing to its pozzolanic properties, fly ash is used as a replacement for some of the Portland cement content of concrete.[៥] The use of fly ash as a pozzolanic ingredient was recognized as early as 1914, although the earliest noteworthy study of its use was in 1937.[៦] Before its use was lost to the Dark Ages, Roman structures such as aqueducts or the Pantheon in Rome used volcanic ash (which possesses similar properties to fly ash) as pozzolan in their concrete.[៧] As pozzolan greatly improves the strength and durability of concrete, the use of ash is a key factor in their preservation.

Use of fly ash as a partial replacement for Portland cement is generally limited to Class F fly ashes. It can replace up to 30% by mass of Portland cement, and can add to the concrete’s final strength and increase its chemical resistance and durability. Recently concrete mix design for partial cement replacement with High Volume Fly Ash (50 % cement replacement) has been developed. For Roller Compacted Concrete (RCC)[used in dam construction] replacement values of 70% have been achieved with processed fly ash at the Ghatghar Dam project in Maharashtra, India. Due to the spherical shape of fly ash particles, it can also increase workability of cement while reducing water demand.[៨] The replacement of Portland cement with fly ash is considered by its promoters to reduce the greenhouse gas "footprint" of concrete, as the production of one ton of Portland cement produces approximately one ton of CO2 as compared to zero CO2 being produced using existing fly ash. New fly ash production, i.e., the burning of coal, produces approximately twenty to thirty tons of CO2 per ton of fly ash. Since the worldwide production of Portland cement is expected to reach nearly 2 billion tons by 2010, replacement of any large portion of this cement by fly ash could significantly reduce carbon emissions associated with construction, as long as the comparison takes the production of fly ash as a given.

សំនង់​ជើង​ទេរទំនប់​

Fly ash properties are somewhat unique as an engineering material. Unlike typical soils used for embankment construction, fly ash has a large uniformity coefficient consisting of clay-sized particles. Engineering properties that will affect fly ash’s use in embankments include grain size distribution, compaction characteristics, shear strength, compressibility, permeability, and frost susceptibility.[៨] Nearly all fly ash used in embankments are Class F fly ashes.

ការ​បង្កើន​គុណភាព​ដី

Soil stabilization is the permanent physical and chemical alteration of soils to enhance their physical properties. Stabilization can increase the shear strength of a soil and/or control the shrink-swell properties of a soil, thus improving the load-bearing capacity of a sub-grade to support pavements and foundations. Stabilization can be used to treat a wide range of sub-grade materials from expansive clays to granular materials. Stabilization can be achieved with a variety of chemical additives including lime, fly ash, and Portland cement, as well as by-products such as lime-kiln dust (LKD) and cement-kiln dust (CKD). Proper design and testing is an important component of any stabilization project. This allows for the establishment of design criteria as well as the determination of the proper chemical additive and admixture rate to be used to achieve the desired engineering properties. Benefits of the stabilization process can include: Higher resistance (R) values, Reduction in plasticity, Lower permeability, Reduction of pavement thickness, Elimination of excavation - material hauling/handling - and base importation, Aids compaction, Provides “all-weather” access onto and within projects sites. Another form of soil treatment closely related to soil stabilization is soil modification, sometimes referred to as “mud drying” or soil conditioning. Although some stabilization inherently occurs in soil modification, the distinction is that soil modification is merely a means to reduce the moisture content of a soil to expedite construction, whereas stabilization can substantially increase the shear strength of a material such that it can be incorporated into the project’s structural design. The determining factors associated with soil modification vs soil stabilization may be the existing moisture content, the end use of the soil structure and ultimately the cost benefit provided. Equipment for the stabilization and modification processes include: chemical additive spreaders, soil mixers (reclaimers), portable pneumatic storage containers, water trucks, deep lift compactors, motor graders.

សំភារៈ​ចាក់​បំពេញ​ហាប់​ខ្លួន​ឯង

Fly ash is also used as a component in the production of flowable fill (also called controlled low strength material, or CLSM), which is used as self-leveling, self-compacting backfill material in lieu of compacted earth or granular fill. The strength of flowable fill mixes can range from 50 to 1,200 lbf/in² (0.3 to 8.3 MPa), depending on the design requirements of the project in question. Flowable fill includes mixtures of Portland cement and filler material, and can contain mineral admixtures. Fly ash can replace either the Portland cement or fine aggregate (in most cases, river sand) as a filler material. High fly ash content mixes contain nearly all fly ash, with a small percentage of Portland cement and enough water to make the mix flowable. Low fly ash content mixes contain a high percentage of filler material, and a low percentage of fly ash, Portland cement, and water. Class F fly ash is best suited for high fly ash content mixes, whereas Class C fly ash is almost always used in low fly ash content mixes.[៨][៩]

បេតុង​អាស្វាល់

ធរណី​ប៉ូលីមែរ

កាល​ពី​ពេល​ថ្មីៗ​នេះ ផ្លាយអាស់ ត្រូវ​បាន​គេ​យក​មក​ប្រើ​ជា​គ្រឿងផ្សំ​មួយ​ក្នុង ធរណី​ប៉ូលីមែរ ដែល​នៅ​ទី​នោះ រ៉េអាក់ទីវីតេ​របស់​កំទេច​ផ្លាយ​អាស់​​ត្រូវ​បាន​គេ​យក​ទៅ​ប្រើ​ជា​កាវ ដែល​អាច​ប្រៀប​បាន​នឹង​ស៊ីម៉ង់ត៍​ផតលែន​ ជា​រូបខាង​ក្រៅ និង​លក្ខណៈ ប៉ុន្តែ​បាន​កាត់​បន្ថយ​នូវ​បរិមាណ​ឧស្ម័ន​ CO2 ជា​ច្រើន​។[១០]

បេតុង​បង្ហាប់​ដោយ​រូឡូ

អិដ្ឋ

បញ្ហា​បរិស្ថាន

ផលប៉ះ​ពាល់​ដល់​ទឹក​ក្រោម​ដី​

ដោយ​សារ​ធ្យូង​មាន​ស្លាក​ស្នាម​សារធាតុ​​អាសេនិច បារីយ៉ូម​ ប៊ែរីល្លីយ៉ូម បូរ៉ុន កាដមីញ៉ូម ក្រូមីញ៉ូម តាល្លីយ៉ូម សេលេនីញ៉ូម ម៉ូលីបដែន និង​បារ៉ត នោះ​ផេះ​របស់​វា​នឹង​បន្ត​មាន​សារធាតុ​អស់​នេះ​បន្ត​ទៀត។ ដូច្នេះ​គេ​មិន​អាច​រក្សា​វា​មិន​អោយ​លេច​ចេញ​ពី​កន្លែង​ស្តុក​បាន​ទេ ប្រសិន​បើ​ទឹក​ភ្លៀង​អាច​ហូរ​ច្រោះ​ប្រដាប់​ស្តុក ហើយ​ហូរ​នាំ​សារធាតុ​ពុល​អស់​នេះ​ទៅដល់​​ទឹក​ក្រោម​ដី[១១]

ភ្នាក់​ងារ​ចំលង

ការ​ព្រួយ​បារម្ភ​នឹង​​ការ​ប៉ះ​ពាល់

គ្រីស្តាល់​ស៊ីលីស​(Crystalline silica) និង​ កំបោរ​(lime) រួម​ជា​មួយ​នឹង​សារធាតុ​ពុល​ផ្សេង​ទៀត​ អាច​បង្ក​ជា​បញ្ហា​ដល់​សុខភាព​។ ថ្វី​បើ​ខាង​ឧស្សាហកម្ម​បាន​អះអាង​ថា​ ផ្លាយអាស់​ មិន​មែន​ជា​សារធាតុ​ពុល​និង​គ្មាន​សារធាតុ​ពុល​ក៏​ដោយ ក៏​ការ​ដក​ដង្ហើម​យក​សារធាតុ​អស់នេះ ការ​ប៉ះ​ពាល់​ដោយ​ផ្ទាល់​ជា​មួយ​នឹង​ស្បែក និង​ការ​ផឹក​ទឹក​ដែល​មាន​សារធាតុ​អស់​នេះ​ ប្រហែល​ជា​អាច​បង្ក​គ្រោះ​ថ្នាក់​ដល់​សុខភាព[១២]


គ្រីស្តាល់​ស៊ីលីស​ ដែល​មាន​នៅ​ក្នុង​ផ្លាយអាស់​​ជា​ភ្នាក់​ងារ​ដែល​អាច​ធ្វើ​អោយ​ប៉ះ​ពាល់​ដល់​សួត​ ហើ​យ​ជា​ពិសេស​បង្ក​ជំងឺ​ស៊ីលី​កូសីស​ (silicosis)។

សារធាតុ​ផ្សេង​ទៀត​របស់​ផ្លាយ​អាស់​ដែល​គួរ​អោយ​បារម្ភ​គឺ​កំបោរ (CaO)។ ជាតិ​គីមី​នេះ​មាន​ប្រតិកម្ម​ជា​មួយ​ទឹក (H2O) បង្កើត​បាន​ជា​កាល់ស្យូម​អ៊ីដ្រុកស៊ីត​ [Ca(OH)2], ដែល​ធ្វើ​អោយ​ផ្លាយអាស់​មាន​ pH រវាង​ 10 ទៅ​ 12, ដែល​មាន​កំរិត​បាស​ពី​មធ្យម​ទៅ​ខ្លាំង​។ វា​នេះ​អាច​បង្ក​ផល​ប៉ះ​ពាល់​ដល់​សួត​ដែរ បើ​វា​មាន​បរិមាណ​គ្រប់​គ្រាន់​។

ឯកសារ​បង្អែក

  1. "ASTM C618 - 08 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete". ASTM International. Retrieved 2008-09-18.
  2. ២,០ ២,១ American Coal Ash Association. "CCP Production and Use Survey" (PDF).
  3. ៣,០ ៣,១ U.S. Environmental Protection Agency. "Using Coal Ash in Highway Construction - A Guide to Benefits and Impacts" (PDF).
  4. U.S. Federal Highway Administration. "Fly Ash".
  5. Scott, Allan N ., Thomas, Michael D. A. (January/February 2007). "Evaluation of Fly Ash From Co-Combustion of Coal and Petroleum Coke for Use in Concrete". ACI Materials Journal 104 (1): 62–70.
  6. Halstead, W. (October 1986). "Use of Fly Ash in Concrete". National Cooperative Highway Research Project 127.
  7. Moore, David. The Roman Pantheon: The Triumph of Concrete. 
  8. ៨,០ ៨,១ ៨,២ U.S. Federal Highway Administration. "Fly Ash Facts for Highway Engineers" (PDF).
  9. Hennis, K. W. (1993). "Proceedings of the Tenth International Ash Utilization Symposium".
  10. Duxson, P.; Provis, J.L.; Lukey, G.C.; van Deventer, J.S.J. (2007), "The role of inorganic polymer technology in the development of 'Green concrete'", Cement and Concrete Research 37 (12): 1590–1597, អ.វ.ល.:10.1016/j.cemconres.2007.08.018 
  11. A December 2008 Maryland court decision levied a $54 million penalty against Constellation Energy, which had performed a "restoration project" of filling an abandoned gravel quarry with fly ash; the ash contaminated area waterwells with heavy metals. C&EN/12 Feb. 2009, p. 45
  12. Managing Coal Combustion Residues in Mines, Committee on Mine Placement of Coal Combustion Wastes, National Research Council of the National Academies, 2006